Availability
| East coast: |   |
West coast: |   |
| Total: | 0 |
---|
The WI-PMS328GF-Alien is a 24 GbE port managed 24V/48V (af/at/bt) switch delivering up to 400W of power. This product is cost-effective, and easy to install & use. By default, it requires no configuration and installation, but can be managed using the powerful web interface, and/or SNMP. With outstanding performance and quality, this product is a great choice for expanding your home, office, or airMax network.
Auto 24/48 V PoE
The manufacturer called this model 'Alien' because it includes Auto 24/48 V PoE.
Managed
The built-in web interface provides extensive control & monitoring features, including:
- PoE (Power over Ethernet). Including Auto Voltage detection (see below), and day-of-week & hourly power control. (E.g. disable PoE on port 6 between 6pm and 8am every week day).
- Port Control, including rate limiting, flow control, trunking and mirroring.
- VLANs (Virtual LANs) including binding MAC addresses to VLAN IDs
- QoS (Quality of Service), including COS, DSCP, and DSCPCOS
- STP, MSTP, RSTP (Spanning Tree Protocol, Rapid STP, Multiple STP)
- SNMP (Simple Network Management Protocol, including GET/SET of PoE ports) (
MIB files)
- LACP (Link Aggregation Control Protocol)
- ACLs (Access Control Lists)
- AAA (Authentication, Authorization and Accounting), including RADIUS+ and 802.1x.
- SNTP (Simple Network Time Protocol)
- GRMP (GARP Multicast Registration Protocol)
- EAPS & ERPS (Ethernet Automatic Protection Switching & Ethernet Ring Protection Switching). These are powerful 'ring' protocols that link 3 or more of these devices in a self-healing, fault-tolerant ring network, with sub 50 millisecond recovery times.
- RMON (Remote Monitoring)
- NDP/NTDP (Neighbour Discovery Protocol & Neighbour Topology Discovery Protocol). Used to build Clusters.
- ... and more. (Click Specifications below to read the full datasheet.)
Auto PoE - 4 Modes
- Ports 1-4: Auto negotiate; 24V Passive (pins 4,5,7,8), or 48V 802.3 af/at (pins 1,2,3,6) (30W max.)
- Ports 5-8: 48V 802.3bt PoE (4-Pair, pins 1,2,3,4,5,6,7,8). (90 W max.)
- Ports 9-24: 48V 802.3af/at PoE (pins 1,2,3,6) (30W max.)
- Ports: 25-28: RJ-45:Non PoE Gigabit, or SFP
Using the management interface, PoE ports 1-4 can be set as below:
- Off - No PoE
- Auto - See above.
- Auto - 24V only (PoE on if 24V device connected)
- Auto - 48V only (PoE on if 802.3af/at device connected)
Features
- All metal construction
- Mounting: Includes:
- Rack mount ears (2 ea), with screws to attach to switch
- Desk mount soft pads (4 ea)
- 3 Year, return to Australia warranty
- 24 x Full Gigabit PoE Switch plus 4 x combo SFP ports ports
- Input Power:
- AC: 110~265V 50/60Hz
- Supports PoE power up to 90W
- Supports multiple PoE modes:
- 48V PoE HiPoE (4-pair, pins 1,2,3,4,5,6,7,8)
- 48V PoE IEEE 802.3bt (Mode A, pins 1,2,3,6)
- 48V PoE IEEE 802.3af/at (Mode A, pins 1,2,3,6)
- 24V Passive PoE (pins 4,5,7,8)
- No PoE (for non-POE devices like PCs)
- Support 0, 24, and 48V PoE Output, with auto-detecting plug and play
- Short-circuit protection and Over-current protection
- Internal 400W power supply with Australian power cord
- Dimensions / Weight: 440 x 290 x 45 mm / 4.6 kg
- Suitable for 48V 802.3af/at/bt and 24V PoE powered devices like many wireless APs, CPEs, IP-cameras, VoIP phones, etc.
- Suitable for non-PoE devices such as PCs
- Ideal for Ubiquiti 48V (e.g. UniFi) and 24V (e.g. airMax) powered devices
SFP Compatibility Testing
We have confirmed this product works with these SFP modules, and presumably many others.
Documentation