This is a DC Powered, Industrial, 24-48V PoE Switch, with powerful and feature-rich management.
Replacement Product
Please see WI-PMS310GF-ALIEN-I
Features
| DC Power 1 | 48 VDC (37 to 57V)
|
|---|
| DC Power 2 | 48 VDC (37 to 57V, e.g. backup)
|
|---|
| DC Power 3 | 12 to 50 VDC (e.g. Solar Panel)
|
|---|
| Managed | The powerful built-in webserver provides monitoring and control over many features.
See below for more details.
|
|---|
| Industrial | Extended Working Voltage: -40℃～80℃
Extra protection from lightning and interference.
|
|---|
| 10 Ports | 8 x Gigabit Auto PoE ports
2 x SFP ports
|
|---|
| PoE output | up to 60W per port (802.3bt)
as required by many PTZ cameras
|
|---|
| Auto POE | PoE voltage automatically applied: 48, or 24, or none.
|
|---|
| Alarms | Internally and/or Externally triggered alarms, with SNMP and/or relay signalling.
|
|---|
| Fast Ring Technology | Link 3 or more of these devices in a self-healing, fault-tolerant ring network, with sub 50 millisecond recovery times.
|
|---|
DC Power
Flexible DC power options.
- DC Inputs 1 & 2 are intended for nominal 48V DC input. See Compatible Products (below) for suitable power supplies.
- DC Input 3 will accept from 12 to 57 VDC. This can be used to directly connect a Solar Panel.
Managed
The built-in web interface provides extensive control & monitoring features, including:
- PoE (Power over Ethernet). Including Auto Voltage detection (see below), and day-of-week & hourly power control. (E.g. disable PoE on port 6 between 6pm and 8am every week day).
- Port Control, including rate limiting, flow control, trunking and mirroring.
- VLANs (Virtual LANs) including binding MAC addresses to VLAN IDs
- QoS (Quality of Service), including COS, DSCP, and DSCPCOS
- STP, MSTP, RSTP (Spanning Tree Protocol, Rapid STP, Multiple STP)
- SNMP (Simple Network Management Protocol) (
MIB files)
- LACP (Link Aggregation Control Protocol)
- ACLs (Access Control Lists)
- AAA (Authentication, Authorization and Accounting), including RADIUS+ and 802.1x.
- SNTP (Simple Network Time Protocol)
- GRMP (GARP Multicast Registration Protocol)
- EAPS & ERPS (Ethernet Automatic Protection Switching & Ethernet Ring Protection Switching). These are powerful 'ring' protocols that link 3 or more of these devices in a self-healing, fault-tolerant ring network, with sub 50 millisecond recovery times.
- RMON (Remote Monitoring)
- NDP/NTDP (Neighbour Discovery Protocol & Neighbour Topology Discovery Protocol). Used to build Clusters.
- ... and more. (Click Specifications below to read the full datasheet.)
Industrial
Level 4 Protection (ESD,RS,EFT,CS) & -40℃～80℃ working temperature range.
Mounting
Two options available (See images):
- DIN Rail: Clips onto a standard DIN rail.
- Wall mount: Wall mounting brackets included.
10 Network Ports
- 8 x 100/1000 Mbps RJ45 ports (Auto Negotiation/Auto MDI/MDIX)
- 2 x 1000 Mbps SFP ports
Auto PoE - Multiple Modes
The Auto-PoE technology built into this product uses intelligent sensing to determine the correct PoE voltage/power to apply:
- 48V
- 802.3bt : 60W, 4-pair POE (Ports 1 & 2 only)
- 802.3at+: 30W, 4-pair POE (Ports 1 & 2 only)
- 802.3at : 30W, 2-pair, Pins 4,5 (+) 7,8(-) (Ports 3 to 8 only)
- 802.3af : 15W, 2-pair, Pins 4,5 (+) 7,8(-) (Ports 3 to 8 only)
- 24V
- passive PoE on pins 4,5,7,8 (Ports 3 to 8 only)
- No PoE
The management software allows overrides of the above default behaviour.
Alarms
Alarm triggers can be internal (e.g. High temp, low voltage, ..) and/or external signals (e.g. high or low voltage). Once triggered, and alarm can be notified digitally (e.g. SNMP TRAPs and/or to a log file), and/or physically (e.g. closing a relay to sound an alarm).
Fast Loop
Three or more devices can be linked in a redundant, self-healing network loop, with sub 50 millisecond (typically 20 millisecond) recovery times in the event of a link failure. Both EAPS & ERPS ring protocols are available.
Other Features
- Metal construction
- 5 Year, return to Australia warranty
- Short-circuit protection and Over-current protection
- Suitable for non-PoE devices such as PCs
- Ideal for Ubiquiti 48V (e.g. UniFi) and 24V (e.g. airMax) powered devices
Specifications - Hardware
| Interface | 8 x 100/1000 Mbps RJ45 Ports (Auto Negotiation/AutoMDI/MDIX)
2 x 1000 Mbps SFP Slots
1 x Console Port
1 x Alarm Input
1 x Alarm Output
1 x Temperature/Humidity Sensor port
|
|---|
| Network Media | 100BASE-TX/1000BaseT: UTP Cat 5, 5e, 6 or above (max. 100 m)
SFP: 1000 Mbps
|
|---|
| Fan | None. Passive cooling
|
|---|
| Surge Immunity | 8KV Per: IEC61000-4-5
|
|---|
| ESD Protection | ESD Level 4 Per: IEC61000-4-2
RS Level 4 Per: IEC61000-4-3
EFT Level 4 Per: IEC61000-4-4
CS Level 4 Per: IEC61000-4-6
|
|---|
| External Power | DC1: 37-57V 8A Max
DC2: 37-57V 8A Max
DC3: 12-50V 10A Max
|
|---|
| PoE Ports (RJ45) | Ports 1-2: 48V 802.3at+/bt (4-pair)
Ports 3-8: 24V & 48V 802.3af/at (2-Pair, 4,5(+) 7,8 (-))
|
|---|
| Packet Forwarding Rate | 18 Mpps
|
|---|
| Mac Address Table | 8000
|
|---|
| Packet Buffer Memory | 4 MB
|
|---|
| Jumbo Frame | 10240 Bytes
|
|---|
| Dimensions | 165 × 135 × 73 mm（L*W*H）
|
|---|
Specifications - Software
| Quality of Service Support | 802.1p CoS/DSCP
priority
4 priority queues
Queue scheduling: SP, WRR,
SP+WRR
Port/Flow- based Rate Limiting
|
|---|
| L2 Features | IGMP Snooping V1/V2/V3
802.3ad LACP (Up to 8
aggregation groups, containing 8 ports per group)
Spanning Tree
STP/RSTP/MSTP
Port isolation
BPDU filtering/guard
TC/Root protect
Loop back detection
802.3x Flow Control
|
|---|
| VLAN | Supports up to 4k VLANs simultaneously (out of 4K VLAN IDs)
Port/ MAC/Protocol-based VLANs
Management VLAN configuration
|
|---|
| Access Control List | L2～L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p, DSCP, protocol and
VLAN ID
Time Range Based
|
|---|
| Security | IP-MAC-Port-VID Binding
IEEE 802.1X Port/MAC Based authentication, Radius,Guest
VLAN
DoS Defence
Dynamic ARP inspection (DAI)
SSH v1/v2
SSL v2/v3/TLSv1
Port Security
Broadcast/Multicast/Unknown
Unicast Storm Control
|
|---|
| Management | Web-based GUI and CLI management
SNMP v1/v2c/v3,compatible with public MIBs
DHCP/BOOTP Client,DHCP
Snooping, DHCP Option82
CPU Monitoring
Port Mirroring
Time Setting: SNTP
Integrated NDP/NTDP feature
Firmware Upgrade: TFTP &
Web
System Diagnose: VCT
SYSLOG
Public MIBs
|
|---|
Specifications - Other
| Certification | CE, FCC, RoHS, RCM
|
|---|
| Package Contents | POE Switch
Temperature/Humidity Sensor
Screw Driver
Guide Book
|
|---|
| Environment | Working Temperature：-40℃～80℃
Storage temperature ：
-40℃～90℃
Working Humidity：5%～95% RH noncondensing
|
|---|
Documentation
