JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

USK-30W-2448 | Solar Kit | Managed | 30 Watts | 8 x PoEUSK-30W-2448 | Solar Kit | Managed | 30 Watts | 8 x PoEUSK-30W-2448 | Solar Kit | Managed | 30 Watts | 8 x PoEUSK-30W-2448 | Solar Kit | Managed | 30 Watts | 8 x PoE
Availability
East coast:  
West coast:1
Total:1

This solar kit is designed for a 24x7 (hrs/days) load of up to 30 Watts, and includes support for:
  • 8 external 24 & 48 PoE devices
  • remote PoE switch management.

This product includes these components:

QtyModelProduct
2SKM-P
SKM-P
Solar: Mount, Panel, Heavy duty
1SKP-160W
SKP-160W
Solar Panel, 160W
1SKP-100W
SKP-100W
Solar Panel, 100W
2Cable-Patch-Outdoor-5M-BK
Cable-Patch-Outdoor-5M-BK
5m Short boot, Grounded, External CAT5e, FTP
1SOL-DPK
SOL-DPK
Solar Dual Panel Kit
1ENC-403020v2
ENC-403020v2
Enclosure, IP65, 400x300x200 mm, lockable
1WI-WP1
WI-WP1
Enclosure, IP55, pole-mount, large
1SOL-CHG-LA-15A
SOL-CHG-LA-15A
Solar Charger | MPPT | 15A | Lead Acid
1SOL-CHG-LI-UPG
SOL-CHG-LI-UPG
LiFePO4 Configuration
1WI-PMS310GF-ALIEN-I
WI-PMS310GF-ALIEN-I
Managed,Industrial,DC 24/48V PoE Switch
1SKB-12120LFP
SKB-12120LFP
Battery, 12V, 120Ah, LiFePO4
1SOL-CBL-MC4-1M
SOL-CBL-MC4-1M
Solar Panel Cable | MC4 | 1 m | 1 pair
1SOL-BASE30-ACCY
SOL-BASE30-ACCY
Solar Base30 Module | Accessory Kit
1SOL-CBL-EXT-2M
SOL-CBL-EXT-2M
Solar Panel Extension Cable | 2 m | 1-pair


Design Philosophy for This Kit

  • KISS (Keep It Simple Stupid)
    Minimise the parts needed, and include all cables/accessories in the kit.
    The solar controller chosen needs no onsite programming; it is pre-configured by us to suit the LiFePO4 battery.
  • Low Self-Consumption
    By focusing on electronics that are very efficient and draw very little power themselves, the overall system design preserves the battery reserves for the powered devices.
    • The Solar Charger in this kit has very low self consumption: 0.2 Watts.
    • The PoE switch in this kit has low self-consumption: 2 Watts
  • LiFePO4 (Lithium) Battery
    This kit is designed around a LiFePO4 (Lithium) battery that offers these advantages over Lead-Acid:
    • Smaller (and lighter) for the same energy capacity.
    • Built-in Battery Managment System (BMS), that protects against Over Charge, Over Discharge, and Over Current
  • 24 and 48 V PoE supported
    The included smart PoE switch can power both 24 and 48 V PoE devices. This switch has an industrial temperature rating.
  • Solar Panel Cables Included
    Cables with standard MC4 connectors are included. This kit is designed to use two solar panels (160 W & 100 W) for a total of 260 W solar power. One Dual Panel Kit is included to safely link the two panels.
  • Managed
    The included Managed, Industrial 24/48 V PoE switch allows remote monitoring/control of the PoE voltages, etc. In factory default mode, this switch auto-switches between 24/48 V PoE on ports 3-8. (Ports 1-2 are 48V only).

Description

This kit is designed to power devices with a total load of up to 30 Watts (W), with 24/7 (hrs/days) availability*.

The 30 Watt figure excludes the system load (solar charger & PoE switch) which has already been included in the calculations.

The device load could be:

Radio/AntennaCamera(s)Total Power
(Watts)
LocoM5
(5.5 W)
None5.5
1 x camera (4.0 W)
UVC-G5-Bullet
G5 Flex camera
9.5
6 x camera (24.0 W)
UVC-G5-Bullet
G5 Flex camera
29.5
Rocket5AC-Lite
(8.5 W)
None8.5
5 x camera (20.0 W)
UVC-G5-Bullet
G5 Flex camera
28.5
LiteAP-120
(7.0 W)
None7.0
1 x camera (4.0 W)
UVC-G5-Bullet
G5 Flex camera
11.0
5 x camera (20.0 W)
UVC-G5-Bullet
G5 Flex camera
27.0
Litebeam 5AC-Gen2
(7.0 W)
None7.0
1 x camera (4.0 W)
UVC-G5-Bullet
G5 Flex camera
11.0
5 x camera (20.0 W)
UVC-G5-Bullet
G5 Flex camera
27.0

Availability *

Designing a solar system with sufficient battery capacity to cover 24 hr periods in the height of summer is easy.

But the depth of winter is the real test of the system.

The table below gives the theoretical duration that the battery alone can power this system plus the device load.

Total Device Load
(Watts)
BatterySolar
Panel
(Volts / Watts)
TypeVoltage
Nominal / Typical
Amp-Hours
(Ah)
Nominal Capacity
(Wh)
Duration until flat
(hours)
20LiFePO412 / 12.812014406212 / 260
25LiFePO412 / 12.812014005412 / 260
30LiFePO412 / 12.812014004412 / 260

Features

  • Complete DIY Solar kit. Battery, and solar panels included.
  • Weatherproof. Designed to be out in the elements. All exterior components are UV stable and weatherproof.
  • Flexible Voltage PoE. Ready to power:
    • 24 V (e.g. Ubiquiti airMAX products), and
    • 48 V (e.g. Ubiquiti UniFi products, and 3rd party cameras, etc.)
  • Two enclosures. Separate Battery and Electronics enclosures.
    • All solar/battery cabling required comes pre-assembled and ready to use.
    • Connectors are either colour coded, and/or polarised so costly mistakes, such as connecting a battery backwards, are avoided.
    • Two external, 5m cables PoE cables included. Extra external PoE cables can be added when checking out.
  • Installation Guide included.

Recommended External PoE Cables

We recommend these external PoE cables:

    0 items

We Accept
VISAMasterCardPayPalBPAYEFT Bank TransferEFTsure VerifiedCrypto incl. Bitcoin
Authorised Ubiquiti Return Centre

Ubiquiti has authorised us as a Warranty Return Centre.

That means we can process Ubiquiti warranty returns in Australia.