Availability
| East coast: |   |
West coast: | 68 |
| Total: | 68 |
---|
With this product, you can quickly install a Point-to-Point (PtP) network bridge link. It comes pre-configured so all you have to do is point-plug-and-play.
Applications
- File sharing between buildings
- Internet/email connection extension to a remote building
- Video surveillance using IP cameras.
- Others ...
This product includes these components:
Qty | Model | Product |
---|
2 | LocoM5 | NanoStation LocoM5 |
1 | PTP-Config | PtP Configuration - 2 x radios |
Specifications
Clear Line of Sight Range | Up to 2 km | Up to 15 km |
TCP/IP speed one-way | 91 Mbps | 60 Mbps |
TCP/IP speed two-way | 150 Mbps | 60 Mbps |
Band | 5 GHz |
Note: Speeds assume absolute clear Line of Sight, and no interference.
What You Get
- 2 x Ubiquiti™ LocoM5 units. These fully weatherproof units come with antenna, electronics and pole mount.
- 2 x Ubiquiti Power Over Ethernet (POE) Injectors with Australian power cords. Each POE Injector has a free LAN port (RJ45) providing the Ethernet connection at each end.
- 2 x Pre-Configuration to Ubiquiti Best Practices. While you can change the configuration later if your needs change, you should not need to perform any configuration when delivered.
What You Provide
- Mounting Pole for the outdoor unit: See Related Products (below) for suggestions
- Ethernet Cable: You need to provide 2 externally rated, grounded Ethernet cables to go between the outdoor units and the indoor POE Injectors. Choose the lengths needed from our range of Premade Grounded Cables.
Note: Ubiquiti's warranty conditions require installation with grounded cables.
Features
- Long Range. Clear Line of Sight (LOS) required between the antennas.
- 300 Mbps max connect speed, giving a bi-directional aggregate TCP/IP throughput of 150 Mbps, and a one-directional, TCP/IP throughput of 91 Mbps.
- Easy pointing. The units have an external LED display giving the received signal level.
- Layer 2 bridge link. This is not a routed link - meaning you are effectively joining two buildings into one virtual LAN. LAN protocols like DHCP and Microsoft Networking work across the bridge without any configuration. Because the units are effectively 2-port learning network switches, they do not pass unnecessary LAN traffic to the other building. That is, LAN traffic between PCs in Building 1 does not flow over the wireless link into Building 2; maximising available bandwidth and performance.
- Outdoor use.
- Horizontal & Vertical polarization.
- Supplied with mast mounting kit.
- Cisco™ VLAN and VoIP compatible. This product is compatible with Cisco™ VLAN and VoIP products.
Do you want WiFi with that?
OK, so you install this PtP link to join Main Building to Remote Building. If you now need to add WiFi coverage in the Remote Building, the simplest solution is to install one of these options in the Remote Building.
- a Ubiquiti UniFi UAP
- a Basic Indoor WiFi AP
- a Basic Outdoor WiFi AP
Default Configuration
This is the default configuration that we ship. You can edit as needed.
- WiFi mode: WDS.
- WiFi channel:
- 2.4 GHz devices: 13 (2472 MHz)
- 5 GHz devices: 152 (5760 MHz)
- Channel width: 40 MHz
- Encryption: WPA2-AES, with a unique passphrase
Mounting
Each unit comes with a free pole-mount. The standard pole mount kit allows azimuth adjustment, but not elevation. Other mounting options are listed below.
Note: This kit does NOT include poles.
Product Specifications