Availability
| East coast: | |
| West coast: | 20 |
 | Total: | 20 |
|---|
360 degree coverage Point-to-MultiPoint network set with at least 800m range.
This product includes these components:
This 3-node network links 3 locations so that they are all on the same LAN (network)
Applications
- Farms: Linking Sheds/Buildings back to the main House
- Factories: Linking multiple buildings back to main Office
- Rural properties: Linking Sheds/Buildings back to the main building
- Accomodation: Caravan parks, Motels, multi-building villas/chalets, etc.
- Remote cameras: Link your IP cameras back to the main Network Video Recorder (NVR).
Features
- Point & Play. The devices are delivered pre-configured as a matched set. No configuration is required onsite. Just Point (the antennas), Power-up, and Play.
- Configuration. To Ubiquiti best practices.
- Outdoor.Weatherproof outdoor units.
- Highly secure. The network links are protected with strong encryption.
- Fast. Each unit has a Gigabit (GbE, 1000 Mbps) network interface. The wireless network links typically run much faster than NBN connections.
- Camera ready. The links are fast enough to support multiple cameras.
Included
- The products in the list above. This includes 3 outdoor antenna/radio combo units.
- Indoor PoE power supplies with ethernet interfaces & Australian power cords.
- Configuration and Testing.
- Security. The wireless links are secured with a unique & random SSID (network name) & wireless PSK (password) pair. In addition, all units are configured with MAC Access Control Lists (ACLs). The basestation (AP) will only accept connections from remote Ubiquiti devices with known MAC addresses. The remote Ubiquiti devices will only connect to the AP with a known MAC address. The installer can login and edit the ACLs as needed; e.g to add extra nodes in the future.
This MAC Access Control only affects connections between the devices in this PtMP set. It does not block connections between any network devices such as Router, PCs, Cameras, etc.
Not Included
- 3 x Mounting poles. The devices come with pole-mounting kits, but you provide the poles. Any pole of appox. 25~50mm will suit. The UB-AM is suitable. The remote units are compatible with the Ubiquiti Quick Mount.
- 3 x Outdoor/Grounded PoE cables. At each location, a grounded cable is needed between the outdoor unit & the indoor PoE power supply. Each installation site will be different, so please choose the lengths that suit your needs. Please see Grounded Cables.
- 3 x Indoor LAN (patch) cables. At each location, an indoor cable must be run between the indoor PoE power supply & some network device, such as the main Internet Router, a WiFi Access Point (AP), LAN switch, a camera, etc. Any standard LAN cable will do. We have various sizes available: UniFi Cat6 Ethernet Cable.
Requirements
This product requires clear line-of-sight between all outdoor antennas. Clear line-of-sight means no trees, buildings, or anything.
Do you want WiFi with that?
If you need to add WiFi coverage inside or outside, the simplest solution is to install one of these options.
- a Ubiquiti UniFi WiFi AP.
- a Basic Indoor WiFi AP.
- a Basic Outdoor WiFi AP.
Extra Nodes
If you need to add additional nodes, please add these to your shopping cart. If ordered at the same time as this product, all nodes will be configured as a set.
Specifications
| Data throughput | 160 Mbps (one-way)
220 Mbps (two-way, aggregate)
|
|---|
Range
(clear line-of-sight between antennas)
Worst case (beam edge) figures shown | 800 m (full speed)
1600 m (25% speed)
|
|---|
| PoE power supplies | Included
|
|---|
| Network interfaces | 1000 Mbps (GbE)
|
|---|
