UniFi 48-Port Managed Switch - 240W

The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports (195 W PoE budget), and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network.

The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports (195 W PoE budget), and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network.

The USW-48-PoE features a 1.3" touch LCM to provide status Managed and is configured by the UniFi Network Controller with UniFi mobile app support. The USW-48-PoE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

Features

• (48) Gigabit Ethernet Ports including (32) 802.3at PoE+ (195 W PoE budget)
• (4) 1 Gbps SFP Ports
• 1.3" touch LCM
• Managed by UniFi Controller
• 240W internal power supply. Switch requires 45 W.
• Managed by UniFi Network Controller

USW 24 Port Gen 2 Switch with SFP

The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless design. The touchscreen displays the current switch state and information for quick diagnosis. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24 switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operating mode (switching, mirroring, or aggregate) per port.

Features:

• (24) Gigabit Ethernet Ports
• (2) Gigabit SFP Ports
• 1.3" color touchscreen for status information
• Managed by UniFi Network Controller
• 1U rackmountable (kit included)

airMAX GigaBeam 60/5 GHz Unit

The GigaBeam is a 60 GHz is an integrated radio + antenna unit. It is designed for low-interference and high-throughput connectivity. It includes a 5 GHz radio for failover. For the 60 GHz link, the GigaBeam uses a channel width of 2160 MHz. The dedicated management radio allows easy setup via Wi-Fi. The GigaBeam unit can be used for both Point to Point (PtP) or Point to Multi Point (PtMP) applications.

Features

• 60 GHz with 5 GHz backup
• Low-interference 60 GHz spectrum
• Up to 1+ Gbps throughput with low latency
• 2.4 GHz management radio
• 2160 MHz channel width
• Operating Modes:
  • Point-to-Point (PtP)
  • Point-to-Multipoint (PtMP) (Future Firmware Upgrade)

LTU-LR - 5 GHz PtMP Client Radio

Designed for long-range applications with its 26 dBi antenna, the LTU LR is a 5 GHz subscriber station. It functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the basestation.

Proprietary LTU Technology

Based on Ubiquiti’s LTU technology, the LTU LR is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps of real TCP/IP throughput and modulation rates of up to 4096QAM.

CPE Modes

The LTU-LR supports both bridged and NAT router modes to suit your specific deployment.

Frequency Split

The LTU-LR can use different frequencies for TX and RX to avoid interference.

Improved Noise Immunity

The LTU LR directs RF energy in a tighter beamwidth. With the focus in one direction, the LTU LR blocks or spatially filters out noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Innovative Design

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of a 26 dBi antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Quick Mounting and Alignment

The LTU LR features a large reflector size and easy elevation adjustment (azimuth is adjusted by rotation around the pole).

WS-26-500-DC

The Netonix, WS-26-500-DC, WISP Switch is designed specifically for the WISP industry with a rugged chassis and extended operating temperature range. It features a simple yet powerful user interface providing the software features WISPs need in a switch. This switch also comes with rack mount ears, part number RMK-26.

Software Features

• Port mirroring
• VLAN dot 1Q / QinQ / Port Trunking
• Bandwidth limiting per port
• Quality of Service - QOS
• Ping watch dog per port
• Scheduled port bouncing
• Cable Diagnostics
• Loop Protection
• DHCP Snooping
• Flow Control - with back pressure
• Storm Control
• Multicast Filtering
• Port Isolation
• Auto TFTP Backup on Config Change
• UDP - Ubiquiti Discovery Protocol
• CDP - Cisco Discovery Protocol
• Security - access control list and login tarpit

POE-24-30W-G - 4 Pair Power

Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:

• Surge protection
• Clamping protection
• Maximum surge discharge
• Peak pulse current
• AC cable with earth ground

Why buy through us?