February 2018 Newsletter
News from UBWH Australia
|
|
|
G3 UniFi Video Camera IR Pro
The UniFi Video Camera G3-PRO delivers detailed video with a PRO grade 3X adjustable zoom lens. The new, larger image sensor combined with 8 high-power LED's captures exceptional detail in any lighting conditions.
Professional Grade for the most demanding installations
Adjust the field of view to precisely match your scene with the ultra-sharp 3X electronically adjustable zoom lens. Capture every detail with the oversized image sensor. See in the dark with the 8 integrated high-power infrared LED's.
Powerful Low-light Performance
The high-power infrared LEDs, wide-aperture lens, and larger image sensor deliver exceptional video clarity even in the dark.
Features:
- 1080p Full HD, 30 FPS
- EFL 3-9 mm, ƒ/1.2 to ƒ/2.1
- Wide-Angle/Zoom Lens
- Outdoor Weather Resistant
- Enhanced Low-Light Performance
- Integrated High-Power Infrared LEDs
- 802.3af/802.3at PoE
- Built-in Microphone
- Wall, Ceiling, or Pole Mount
These are currently in the air, and will be available to ship within the week. View the UVC-G3-Pro pricing and availability here....
|
|
|
Ubiquiti EdgeRouter Mounting Kit
You can use the EdgeRouter Rack Mount Kit to mount the EdgeRouter 4 in a standard 1U high rack.
These are currently in the air, and will be available to ship within the week. View the ER-RMKIT pricing and availability here....
|
|
|
|
airFiber 5X HD
The AF‑5XHD features Ubiquiti's newest LTU radio technology, offering greater channel bandwidths (up to 100 MHz) and higher adaptive modulation (up to 1024QAM). This results in total throughput up to 1Gbps with a range of up to 100km.
The AF-5XHD also includes a special IP67 upgrade kit for enhanced protection from dust and water.
Key Features
- Configurable GPS Synchronization - The AF-5XHD offers configurable support for 2, 2.5, 4, and 5 ms frames. Timing is compatible with all other synchronous systems.
- Dual Redundant Gigabit Ethernet Ports with PoE - The AF-5XHD has two Gigabit Ethernet ports that can be used to provide redundant PoE power.
- Bluetooth Wireless Configuration - Use the built-in Bluetooth interface for wireless configuration.
- Wide Voltage Range, Enhanced Surge Protection - The AF-5XHD has an operating voltage range of 24‑48VDC and provides enhanced surge protection.</ul>
These will be in stock shortly. We will list these for sale once we have received Australian Compliance on the product. For further information see here....
|
|
|
|
Why buy through us?
Here at UBWH Australia, we have been working hard to improve our service offering to you, our customers. In doing so, we are excited to highlight a few of our advantages:
1. Authorised Ubiquiti RMA Centre for Australia. We have worked closely with Ubiquiti USA to set this up. When you lodge warranties with us and send the faulty item back, we send you a new one from our stock. No more lengthy turn around times. View the new RMA form here.
2. Same Day Dispatch. Our new warehouse will dispatch orders the same day in 98% of cases, for orders paid before 12.30pm AEST and shipped by Australia Post. Occasionally, large orders will cause a delay until the next business day.
If critical, please contact us prior to ordering. We will update you on the days proceedings and will endeavor to have your paid order dispatched same day.
3. Extended Warranties on everything we sell. Optional 2 and 3 year warranties are in addition to the normal Manufacturer's Warranty, plus the Consumer Guarantee required by Australian Consumer Law (ACL) for all Australian Consumers, at a small cost. These can be selected during the checkout process at http://ubwh.com.au
|
|
|
|
|
|
|
Stories Of The Month
New Sliding Rack Mount Kit for Smaller Edge Switches
This cool new adjustable rack mount kit allows you to install the various smaller Edge Products like the ER-4, ER-6P, etc into 19 inch racks.
Full story...
View the ER-RMKIT pricing and availability here....
|
|
|
LTU AF5X-HD Provides UFiber Backhaul
Swapping in an AF5X-HD will almost always result in improved performance.
The LTU based AF5X-HD achieves 10X modulation much easier than the AF-5X for several reasons. First it can hit 10X with as little as -62 of signal (with 20mhz channel). Compare that with -54 or so for a regular AF5X. Also the AF5X-HD allows 10X at a much, much higher conducted power level. The old rules about how much gain you need and cranking down the conducted don't seem to apply to the LTU.
Full story...
View the AF-5XHD here....
|
|
|
|
|
Hint:
uFiber Firmware update
UFiber, the first real Plug & Play GPON platform, allows building passive optical networks with virtually no previous experience, minimum effort, and at a low cost. UBNT has recently announced the all new firmware update for uFiber GPON, pushing UFiber GPON to the Next Level. Featured updates this firmware provides:
- Router Mode – UFiber Nano G now includes a router mode option to keep your customers in a separate network behind NAT. It is possible to configure all router mode settings including the address pool with DHCP directly from the OLT web interface with a few simple clicks. Check out this guide for how to set up your first router profile. Router mode is fully supported with UFiber OLT, for third party OLT support, see this article.
- Link Speed – Now you can switch the speed of the 1Gb LAN port of Nano G to easily cap your customers to 10Mbps or 100Mbps speeds.
- PPPoE Settings – If you are using PPPoE on your network, now you can use Nano G as the PPPoE client directly and provision it with the needed settings from OLT.
View the full announcement here.
View our range of uFiber products here.
|
|
|
Online Training
The UniFi Course has been upgraded and is now based on Version 4 of the Controller and runs on a CloudKey.
In a world's first, Online training (developed in Australia) is now available for the Ubiquiti products shown.
You benefit in a number of ways:
- Cheaper - than attending a formal 2-day course in a classroom environment.
- Faster - no need to wait until the next classroom course is scheduled nearby.
- More convenient - the self-paced courses can be scheduled around other demanding work.
- More practical - the Ubiquiti classroom courses are great for students needing to delve deep into theory such as Radio Waves, Antenna design, TDMA protocols, Link-Budgets, UniFi-WiFi site surveys, etc. But in many cases, students just want to know how to setup some very common scenarios. These Installer courses are targeted with less theory and more practice.
The way each course works is ... each student:
- signs up and receives by email a set of detailed course notes. These can be kept as a reference document for use later on-the-job.
- is allocated real test hardware for 7 days. This is hardware the student gets to configure (over the Internet).
- passes an online quiz for each module. When all module quizzes have been passed, the student gets emailed a Certificate of Completion.
More ...
|
|
|
|
|
