JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

PTP-PBE-2AC-400 | PtP Bridge Link - 30 km, 330 Mbps, 2.4 GHzPTP-PBE-2AC-400 | PtP Bridge Link - 30 km, 330 Mbps, 2.4 GHz
Availability
East coast:  
West coast: 
Total:0

With this product, you can quickly install a Point-to-Point (PtP) network bridge link. It comes pre-configured so all you have to do is point-plug-and-play.

Applications

  • File sharing between buildings
  • Internet/email connection extension to a remote building
  • Video surveillance using IP cameras.
  • Others ...

This product includes these components:

QtyModelProduct
2PBE-2AC-400
PBE-2AC-400
PowerBeam-2AC-400
1PTP-Config
PTP-Config
PtP Configuration - 2 x radios


Specifications

Clear Line of Sight Range Up to 6 km  Up to 30 km
TCP/IP speed one-way 330 Mbps 50 Mbps
TCP/IP speed two-way 330 Mbps 100 Mbps
Band 2.4 GHz
Note: Speeds assume absolute clear Line of Sight, and no interference.

What You Get

  • 2 x Ubiquiti™ PBE-2AC-400 units. These fully weatherproof units come with antenna, electronics and pole mount.
  • 2 x Ubiquiti Power Over Ethernet (POE) Injectors with Australian power cords. Each POE Injector has a free LAN port (RJ45) providing the Ethernet connection at each end.
  • 2 x Pre-Configuration to Ubiquiti Best Practices. While you can change the configuration later if your needs change, you should not need to perform any configuration when delivered.

What You Provide

  • Mounting Pole for the outdoor unit: See Related Products (below) for suggestions
  • Ethernet Cable: You need to provide 2 externally rated, grounded Ethernet cables to go between the outdoor units and the indoor POE Injectors. Choose the lengths needed from our range of Premade Grounded Cables.
    Note: Ubiquiti's warranty conditions require installation with grounded cables.

Features

  • Clear Line of Sight (LOS) required between the antennas.
  • Bi-directional aggregate TCP/IP throughput of 330 Mbps, and a one-directional, TCP/IP throughput of 330 Mbps.
  • Easy pointing. The units have an external LED display giving the received signal level.
  • Layer 2 bridge link. This is not a routed link - meaning you are effectively joining two buildings into one virtual LAN. LAN protocols like DHCP and Microsoft Networking work across the bridge without any configuration. Because the units are effectively 2-port learning network switches, they do not pass unnecessary LAN traffic to the other building. That is, LAN traffic between PCs in Building 1 does not flow over the wireless link into Building 2; maximising available bandwidth and performance.
  • Outdoor use.
  • Horizontal & Vertical polarization.
  • Supplied with mast mounting kit.
  • Cisco™ VLAN and VoIP compatible. This product is compatible with Cisco™ VLAN and VoIP products.

Do you want WiFi with that?

OK, so you install this PtP link to join Main Building to Remote Building. If you now need to add WiFi coverage in the Remote Building, the simplest solution is to install a Ubiquiti UniFi UAP-AC-Lite in the Remote Building.

Default Configuration

This is the default configuration that we ship. You can edit as needed.

  • WiFi mode: WDS.
  • WiFi channels: 2444 - 2484 MHz
  • Channel width: 40 MHz
  • Encryption: WPA2-AES, with a unique passphrase

Mounting

Each unit comes with a free pole-mount. The pole mount allows both azimuth (left-right) and elevation (up-down) adjustment. Mounting options are listed below. Note: This kit does NOT include poles.

Product Specifications

    0 items

We Accept
VISAMasterCardPayPalBPAYEFT Bank TransferEFTsure VerifiedCrypto incl. Bitcoin
Authorised Ubiquiti Return Centre

Ubiquiti has authorised us as a Warranty Return Centre.

That means we can process Ubiquiti warranty returns in Australia.