February 2024 Newsletter
News from UBWH Australia
|
|
UniFi Express WiFi 6 AP
UniFi Express is a complete UniFi Networking stack in an ultra-compact, plug-and-play form factor. It runs UniFi Network and features a powerful gateway engine and built-in WiFi 6 with seamless meshing.
Features
- 140 square meters of single-unit coverage
- 60+ connected WiFi devices
- (1) GbE RJ45 WAN port
- (1) GbE RJ45 LAN port to extend network
- 0.96" LCM status display
Specifications
Dimensions: |
98 x 98 x 30 mm |
Weight: |
302 g |
Networking Interfaces: |
(1) GbE RJ45 WAN port
(1) GbE RJ45 LAN port |
Management interface: |
Ethernet
Bluetooth 5.1 |
Maximum Power Consumption: |
10 W |
Max. TX power
2.4 GHz
5 GHz |
22 dBm
25 dBm |
Throughput rate
2.4 GHz
5 GHz |
573.5 Mbps
2.4 Gbps |
Antenna gain
2.4 GHz
5 GHz |
4 dBi
5.15 dBi |
Power Method: |
USB type C (5V DC/3A)
(power adapter included) |
In stock now. View availability and pricing here...
|
|
|
Solar Base Kit 30W
This base module is common to most of our 30 W Solar Kits.
This base module can be upgraded by adding components to match specific needs.
Features
- All-in-one building block with many of the components required to make a complete Solar Installation.
- You just add the following:
In stock now. View availability and pricing here...
|
|
|
|
Battery, 12V, 120Ah, LiFePO4
Features
Ideal for Solar applications.
- Ideal for solar applications. Designed to withstand repeated charge and recharge cycles.
- Non-spillable. Lithium-Iron Phosphate (LiFoPO4) technology helps eliminate the hazards associated with acid spills or leaks and allows for a sealed maintenance free design that avoids any need for regular topping-up of an electrolyte.
Suitable Enclosure
Fits in our ENC-403020.
Specifications
Nominal voltage |
12.8 V. Suitable for 12V charge systems. |
Max Charging Voltage |
14.6 V |
Rated Float Charge Voltage |
14.4V |
Capacity |
120 Ah @ 25 ℃. (=1536 Wh @ 25 ℃) |
Technology |
LiFePO4, Lithium Iron Phosphate |
BMS |
Built-in Battery Management System for safe charging and discharging. Provides protection for: Over Charge, Over Discharge, Over Current |
Discharge Cut off Voltage |
10 V |
Max. Series/Parallel |
2 Series or 2 Parallel |
Weight |
16 kg |
Dimensions |
330 x 215 x 172 mm (L x H x W) |
Max. Discharge Current |
120 A @ 25°C |
Operating Temperature |
Charging: 0 - +50°C
Discharging: -20 - +60°C |
Life |
2000 Cycles |
Warranty |
24 months, pro-rata |
Case Material |
ABS |
Terminals |
M8 Threaded (2 x M8 Bolts included) |
In stock now. View availability and pricing here...
|
|
|
Solar Dual Panel Kit
This kit is required when combining two Solar Panels.
Features
- Combines two solar PV panels into a single array.
- Includes 15 A Blocking Diodes. These diodes prevent current flowing backwards through a solar panel when one of the panels is generating more power than the other (e.g. when one panel in in shade).
- Easy installation. No tools required.
- Weatherproof
Specifications
Blocking Diodes |
Weather proof
MC4 connectors
15 A capacity, to suit solar panels up to 180 W. |
Parallel Connection Adapters |
1 x Positive line & 1 x Negative line
MC4 connectors
Weatherproof. |
In stock now. View availability and pricing here...
|
|
|
|
Why buy through us?
Here at UBWH Australia, we have been working hard to improve our service offering to you, our customers. In doing so, we are excited to highlight a few of our advantages:
1. Authorised Ubiquiti RMA Centre for Australia. We have worked closely with Ubiquiti USA to set this up. When you lodge warranties with us and send the faulty item back, we send you a new one from our stock. No more lengthy turn around times. View the new RMA form here.
2. Same Day Dispatch. Our new warehouse will dispatch orders the same day in 98% of cases, for orders paid before 12.30pm AEST and shipped by Australia Post. Occasionally, large orders will cause a delay until the next business day.
If critical, please contact us prior to ordering. We will update you on the days proceedings and will endeavor to have your paid order dispatched same day.
3. Extended Warranties on everything we sell. Optional 2 and 3 year warranties are in addition to the normal Manufacturer's Warranty, plus the Consumer Guarantee required by Australian Consumer Law (ACL) for all Australian Consumers, at a small cost. These can be selected during the checkout process at http://ubwh.com.au
4. Pre and Post Sales Support. As a customer of ours, you have access to our high standard of pre and post sales support. Whether you need a design checked over, product recommendation or help setting up we can help. Contact us.
5. Credit Card Security
There has been a lot of unfortunate reports lately of high profile hacks into large organisations. Did you know we do NOT store your credit card details on any of our servers - so those details can not be stolen from us.
For your protection and peace of mind, we use a card processing provider that has been certified to the highest level of the Payment Card Industry Data Security Standard.
|
|
|
|
|
|
|
Hint: UniFi Recovery Mode
Recovery Mode is a last-resort solution to recover an unresponsive UniFi device, often resulting from power loss occurring at the same time as an update. Only use Recovery Mode if you are unable to perform a standard factory reset.
Note: UniFi Power Backup can prevent unexpected power losses from occurring.
The following UniFi devices support Recovery Mode:
- Dream Machine, Dream Machine Pro & Dream Wall
- Access Points (all models)
- Cloud Key and Cloud Key Gen2 Plus
- Cameras
- USW Flex Mini
View the full guide here...
|
|
Online Training
New course: UniFi V7 - Course 1
New course: UniFi V7 - Course 2
In a world's first, Online training (developed in Australia) is now available for the Ubiquiti products shown.
You benefit in a number of ways:
- Cheaper - than attending a formal 2-day course in a classroom environment.
- Faster - no need to wait until the next classroom course is scheduled nearby.
- More convenient - the self-paced courses can be scheduled around other demanding work.
- More practical - the Ubiquiti classroom courses are great for students needing to delve deep into theory such as Radio Waves, Antenna design, TDMA protocols, Link-Budgets, UniFi-WiFi site surveys, etc. But in many cases, students just want to know how to setup some very common scenarios. These Installer courses are targeted with less theory and more practice.
The way each course works is ... each student:
- signs up and receives by email a set of detailed course notes. These can be kept as a reference document for use later on-the-job.
- is allocated real test hardware for 7 days. This is hardware the student gets to configure (over the Internet).
- passes an online quiz for each module. When all module quizzes have been passed, the student gets emailed a Certificate of Completion.
More ...
|
|
|
|
|