JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

The Ubiquiti airFiber range of products is the premium range for outdoor, Wireless Point-to-Point (PtP) and Point-to-MultiPoint (PtMP) deployments.

Read more ...

Design & Deployment

airFiber's modem technology was built and designed for the challenges of outdoor point-to-point bridging and network backhauls. airFiber is also incredibly easy to deploy; the simple mechanical design of equipment means that a two-person team can install and an align and airFiber link easily. Alignment can also be further optimised by accessing the received signal levels through the airFiber LED display, airFiber Configuration Interface, and audio tone feature. Some airFiber models operate the license-free 24GHz and 5GHz bands, meaning you can purchase and install airFiber without any permits, registrations and licensing costs.

Innovative Dual-Antenna Architecture

Some airFiber products feature a dual-independent, 2x2 MIMO, high-gain reflector antenna system. Separate yet integrated transmit (TX) and receive (RX) antennas help extend link budgets by eliminating the extra RF losses caused by the switches or duplexers required in systems with common TX/RX antennas.

Ubiquiti airFiber Products

The Ubiquiti airFiber product range was developed from the ground up by Ubiquiti engineers to produce the best wireless link possible, without the limitations of the 802.11 'WiFi' protocols. As such, they use a propriety over-the-air protocol with extremely low latency, and very high speeds. With such low latency, airFiber can deliver robust FDD performance as a carrier-class network backhaul, an airFiber network is perfectly scalable to thousands of devices. The range includes a selection of radios, antennas and accessories ideal for carrier backhaul building to building enterprise use, or public safety applications.

The Ubiquiti airFiber is perfect for deployment in crowded RF environments due to its highly efficient use of 'unlicensed' band spectrum. Utilising a dual antenna design and proprietary self-interference cancellation algorithms, airFiber extracts more usable channels out of the available spectrum than any other comparable radio system. airFiber’s built-in configuration tool guides the selection of RF channel bandwidths, transmit power, and other parameters to minimize interference potential and optimize link budgets.

  • airFiber2: These products operate in the 2.4 GHz band. Only single antenna (Half Duplex) products are available. No license required for operation in Australia.
  • airFiber3: These products operate in the 3 GHz band. Only single antenna (Half Duplex) products are available. License required for operation in Australia.
  • airFiber4: These products operate in the 4.9 GHz band. Only single antenna (Half Duplex) products are available. Usage of the AF-4X is permitted in Australia for Public Safety Agencies.
  • airFiber5: These products operate in the 5 GHz band. Both dual antenna (Full Duplex) and single antenna (Half Duplex) products are available. No license required for operation in Australia.
  • airFiber11: These products operate in the 11 GHz band. Only single antenna (Half Duplex) products are available. License required for operation in Australia.
  • airFiber24: These products operate in the 24 GHz band. Only dual antenna (Full Duplex) products are available. No license required for operation in Australia.

The airFiber range is offered in two broad categories:

  • Built-In Antennas: Examples include the AF-24/24HD and AF-5/5U
  • External Antennas: This is the AF-X range including the AF-2X, AF-5X, AF-11FX

Things to look for

Check the individual datasheets for more details.
  • Half-Duplex (HD) or Full-Duplex (FD)? Some airFibers can operate in FD mode; others only in HD mode. The advantage of FD mode is that traffic flows in both directions simultaneously which helps lower latency.
  • Max. Throughput. Throughputs between 0.5 to 1.2 Gbps are available.
  • Frequency Band. Some airFibers operate in bands requiring the operator to buy a licence (e.g. AF-11FX, 11 GHz). Others operate in the class-licensed (i.e. free) bands of 2.4 and 5 GHz.
  • PtP or PtMP. Ubiquiti's road-map includes adding PtMP to some of the airFibre products. The marketing term for this is LTU. When that software is released, it will be possible to operate a central airFiber LTU 'Access Point' with multiple airFiber 'Clients' pointed back to it.
airFiber 4x4 Multiplexer Mount

airFiber 4x4 Multiplexer Mount

AF-NxN - Multi-Gigabit Throughput Introducing the airFiber NxN, a thoughtfully engineered MIMO multiplexer that increases the throughput of your airFiber link up to …

Model
AF-MPX4
Availabilty
0
airFiber 8x8 Multiplexer Mount

airFiber 8x8 Multiplexer Mount

AF-NxN - Multi-Gigabit Throughput Introducing the airFiber NxN, a thoughtfully engineered MIMO multiplexer that increases the throughput of your airFiber link up to …

Model
AF-MPX8
Availabilty
10
airFiber-11 High Band Full Duplex

airFiber-11 High Band Full Duplex

Technical Specifications Full-Duplex: Simultaneous transmit and receive on 2 different frequencies 2 x Duplexers Included: High band duplexers Channel Ranges: 10.940 to 11.200 …

Model
AF-11-H
Availabilty
1
airFiber-11 Low Band Full Duplex

airFiber-11 Low Band Full Duplex

Technical Specifications Full-Duplex: Simultaneous transmit and receive on 2 different frequencies Duplexers Included:2 x Low band duplexer Channel Ranges: 10.700 to 10.955 GHz …

Model
AF-11-L
Availabilty
2
airFiber-11FX Radio

airFiber-11FX Radio

Technical Specifications Full-Duplex: Simultaneous transmit and receive on 2 different frequencies Duplexers: Each radio requires one or two duplexers (Sold separately). Channel Ranges: Low …

Model
AF-11
Availabilty
1
airFiber-24, 1-pack

airFiber-24, 1-pack

This product is end of life. Although the Airfiber range does not completely replace the AF-24, the …

Model
AF-24
airFiber-2X

airFiber-2X

airFiber-2X Carrier Backhaul Radio The airFiber®X features up to 17.1 Mbps/MHz of industry-leading spectral efficiency and uses proprietary Hybrid Division Duplexing …

Model
AF-2X
Availabilty
3
airFiber-4X Public Safety Radio

airFiber-4X Public Safety Radio

Features 500+ Mbps Ultra low latency Long range Plug & Play integration Deployment Flexibility The compact form factor allows the airFiber AF‑4X to be used with …

Model
AF-4X
Availabilty
2
airFiber-5X HD. IP67 rated.

airFiber-5X HD. IP67 rated.

Deployment Flexibility The compact form factor allows the airFiber X to be used with airFiber Slant 45 antennas, or instantly upgrade …

Model
AF-5XHD
Availabilty
65
airFiber60 - 1 Gbps

airFiber60 - 1 Gbps

Features: 60 GHz radio with 5 GHz radio backup Low-interference 60 Ghz spectrum Long range, up to 2 km Up to 1 Gbps with …

Model
AF60
Availabilty
0
airFiber60 High Density - 6 Gbps

airFiber60 High Density - 6 Gbps

Features: Low-interference 60 GHz spectrum Up to a 2 km link range Supports channel bonding to achieve up to a 6 Gbps throughput …

Model
AF60-HD
Availabilty
62
airFiber60 Long Range - 1.9 Gbps

airFiber60 Long Range - 1.9 Gbps

The AF60 LR is a 60 GHz system designed for high-throughput connectivity over an extended range. The airFiber 60 LR …

Model
AF60-LR
Availabilty
12
Result Pages:

    0 items

We Accept
VISAMasterCardPayPalBPAYEFT Bank TransferEFTsure VerifiedCrypto incl. Bitcoin
Authorised Ubiquiti Return Centre

Ubiquiti has authorised us as a Warranty Return Centre.

That means we can process Ubiquiti warranty returns in Australia.